So, you’ve opted for the easy clean shower screen option of EnduroShield. To ensure you keep your shower screen sparkling, it’s essential to now pay close attention to your warranty and care instructions which were provided by your approved applicator.
To help you form a clearer understanding of the benefits of EnduroShield and the correct shower cleaning techniques you should be adopting, our team has put together a helpful guide below.
Easy clean shower screen
Shower cleaning doesn’t have to be a difficult task involving harmful chemicals and hours of elbow grease. The EnduroShield coating has been specially formulated to repel contaminants, therefore creating an easy clean shower screen.
However, having EnduroShield applied to your shower screen doesn’t mean you can neglect your shower cleaning tasks altogether. There are still a few basic cleaning steps which should be followed to ensure your shower screen is maintained and your ten-year warranty is kept intact.
How to clean your shower screen after EnduroShield
You will firstly have to determine the type of water running at your property—it will either be standard water or medium/hard water. Throughout Queensland, many properties will run on hard water which can result in shower screens becoming dirty much quicker than when soft or standard water is available.
What to clean your EnduroShield shower screen with
Always ensure you regularly squeegee the shower screen glass to keep it clean—this will also reduce the chance of mineral spots forming. You will need to clean your shower screen glass once a week. All you need for this is a mild detergent or a mixture of vinegar and water. If your property runs on standard water, your vinegar mix should be made up of 25% vinegar, but if you have hard water, you will require a mix of 50% vinegar.
The easy clean shower screen process
Start by spraying the mixture onto the shower screen. Next, use a wet white cleaning pad to wipe all over the screen from side to side and up and down. Let this sit for two minutes before rinsing the glass and then remove the excess water with your squeegee. Complete the process by drying the edges with some paper towel or a microfibre cloth.
After EnduroShield has been applied to your shower screen, you will be provided with all the information you need to properly care for the coating and make sure aren’t voiding your warranty in any way. The team here at EnduroShield Queensland will recommend the best items to clean your shower screen with, this will include a Pulex Squeegee and white cleaning pads.
Do you want an easy clean shower screen? For more information on EnduroShield or to make a booking with our skilled applicators, be sure to get in contact with our Queensland team today on 07 3287 1885.